How to make a moonhouse model

Blue print for the House walls

Blue print for the House walls

Drawing and filling in windowns and door

Drawing and filling in windowns and door

Pens, pencil, ruler, eraser and 240 g/sqm red paper

Pens, pencil, ruler, eraser and 240 g/sqm red paper

Cutting our. Note not to cut all the way. remaining parts needed for placing the string.

Cutting our. Note not to cut all the way. remaining parts needed for placing the string.

Cut and folded along the corners

Cut and folded along the corners

Separated walls

Separated walls

Roof blue print

Roof blue print

Transfer drawing to black 220 g/sqm paper

Transfer drawing to black 220 g/sqm paper

Remember to draw the center line. It makes the paper fold nicely

Remember to draw the center line. It makes the paper fold nicely

Cut and fold

Cut and fold

Cur a piece of cotton string

Cur a piece of cotton string

Place the walls on the inside of the roof, one centimeter from the edge

Place the walls on the inside of the roof, one centimeter from the edge

Get 26 cm of spinnaker tape (or simpler material)

Get 26 cm of spinnaker tape (or simpler material)

Stick the tape over the cotton string like so.

Stick the tape over the cotton string like so.

Fold an use a knife along to cut the tape. Do not cut the string

Fold an use a knife along to cut the tape. Do not cut the string

Cut out the profile

Cut out the profile

This is the result

This is the result

Stand up! Draw white borders on the roof with TipEx

Stand up! Draw white borders on the roof with TipEx

Cut out an 8x12 cm piece of cardboard

Cut out an 8×12 cm piece of cardboard

Fasten it with tape to one side wall on the inside of the house

Fasten it with tape to one side wall on the inside of the house

And it can be folded for easy transportation.

And it can be folded for easy transportation.

Looks good

Looks good

Yes it does

Yes it does

Kommentera